Steam Boiler | Working principle and Types of Boiler
Steam Generator Boiler versus Classic fire-tube Steam Boiler THE PRINCIPLE IN THE FIRE-TUBE STEAM BOILER, is that from the surface of a large volume of feed water, steam is evaporated. This boiling process is heated by the wall of the combustion chamber (the radiant part) and by the exhaust gasses passing through a bundle of so-called fire-tubes or smoke-tubes forming the the convection part of the
07/01/2019 · In conventional high-temperature heating systems, the ratio of the temperature of the supplied water and the water in the return circuit is usually 75-80 ° C to 55-60 ° C. A system with a condensing boiler is effective only in low-temperature mode, i.e. when the ratio of supply and return temperatures is 50-55 ° C to 30-35 ° C.
Working Principle. Both gas and oil fired boilers use controlled combustion of the fuel to heat water. The key boiler components involved in this process are the burner, combustion chamber, heat exchanger, and controls. The burner mixes the fuel and
24/02/2012 · Larger heating surface can be achieved by using more numbers of water tubes. Due to convectional flow, movement of water is much faster than that of fire tube boiler, hence rate of heat transfer is high which results into higher efficiency. Very high pressure in order of 140 kg/cm 2 can be obtained smoothly. Working Principle of Water Tube Boiler
The heart of an industrial boiler system is a hot water or steam boiler operated with a certain kind of fuel. The boiler heats up or evaporates the water inside it, which is then transported to the consumers via pipe systems. In case of hot water the transport energy is generated by pumps, in case of steam the transport is based on inherent pressure.
Generally, a steam boiler is a type of closed container, designed with steel for heating the water to generate steam by some energy source like burning of fuel with eventually. The vapor generated may be delivered at low-pressure for the industrial progression work in sugar industries, cotton mills, and for generating steaming water that can be utilized for heat up fixing at much low-force.